Drum Stryle Chippers

Tree Care Equipment (Drum Style Chipper)

• +30 Tons Chips per hour.
• Chipping Capacity from Brush to 550mm
• Horespower 250 to 325hp
• Length 5.94 m
• Height 2.84 m, Width 2.28 m
• Weight 4,944 kg
• Infeed Chute Opening 168 cm x 102 cm
• Infeed Throat Opening 79 cm x 51 cm
• Drum Diameter 92 cm, Drum Width 72 cm
• 6x Blades above chip pocket fitted.
• Remote controls

Beever M20R Drum Style Chipper: + Extended Infeed Deck.

• Ideal unit for: Bio-mass production, lot and land clearing, contractors and large tree services
• 7ft long "cat" type 2 strand infeed deck.
• Hydraulically foldable. Hydraulic Stabiliser legs.
• Blades, Drum, Throat etc all same as above.
• Remote Control.

• TorqMax PlusTM Top Feed Wheel Compression System generates 9,935 lb/ft of hydraulic feed wheel pulling force.
• 14ft reach.
• 360 deg continuous rotation.
• Blades, Drum, Throat etc all same as above.
• Remote Control.

• +25 Tons Chips per hour.
• Chipping Capacity from Brush to 500mm
• Horespower 140 - 180 kW
• Length 5.33 m (single axle); 5.66 m (tandem axle); 5.66 m (dual wheel axle)
• Height 2.62 m, Width 2.18 m (single/tandem axle); 2.57 m (dual wheel axle)
• Weight 4,173 kg (single axle); 4,944 kg (tandem axle); 4,717 kg (dual wheel axle)
• Infeed Chute Opening 165 cm x 97 cm
• Infeed Throat Opening 79 cm x 51 cm
• Drum Diameter 91 cm, Drum Width 60 cm
• 4x Blades above chip pocket fitted.
• Feed Rate Up to 36 mpm
• Fuel Tank Capacity 181 L ( 246 L - JD 186 kW and Cummins 193 kW only)
• Hydraulic Oil Tank Capacity 151 L
• Optional high profile hydraulic winch with cabling.

• Both specs as above as far as chipping capability is concerned
• Both supplied with fold up feed tray, internal hydraulics for drive of duel feed rollers and pressure on rollers,
• Both have thick skids on bottom
• Supplied standard with slip clutch PTO.
• 15- Horespower Required 100 - 130hp & Weight 4,400 Lbs
• 12- Horespower Required 50 to 85 hp & Weight 3,400 Lbs

Disc Style Chipper

Tree Care Equipment (Disc Style Chipper)

• Horespower 80 -96 kW
• Produces 10 tons of chips per day.
• Weight 2,721 kg
• Infeed Chute Opening 127 cm x 79 cm
• Infeed Throat Opening 46 cm x 30 cm
• Disc Size 5 cm thick x 94 cm D --4 Blades
• Feed Rate Up to 30 mpm
• Chipping Capacity 30 cm
• Fuel Tank Capacity 98 L
• Hydraulic Oil Tank Capacity 64 L

• Horespower 18 - 26 kW
• Produces 1,75 tons of chips per hour
• Length 3.76 m (operating); 3.07 m (transport)
• Weight 1,043 kg (gas); 1,270 kg (diesel)
• Infeed Chute Opening 94 cm x 61 cm
• Infeed Throat Opening 33 cm x 15 cm
• Disc Size 3 cm thick x 71 cm D--2 bladed.
• Feed Rate 18 mpm
• Chipping Capacity 15 cm
• Fuel Tank Capacity 30 L
• Hydraulic Oil Tank Capacity 34 L