Ritlee Wood Shaver

New From Ritlee:

Ritlee Manufactured Woodpecker Wood Shaver.

1. Built for shaving wood logs with a diameter of 5 to 40cm and a length of 90 to 120cm. Will handle all local woods both wet and dry.

2. Production rate of 6 to 8 cu meter per hour Discharge on belly mounted conveyer belt.

3. Fitted with 3x 21kw electric motors. Other power options are available upon request!

4. Has 2x shaving block heads 45cm wide
Each fitted standard with 4 blades.

Please see below for further specifications.

Please Note:

1. Safety pannels fitted over all chain and V-belt drives.

2. Conveyer Discharge with shaving containment rubber pannels entire length of discharge belt.

3. Nice solid construction of Chassis, wood box, skid bed etc.

4. Each shaving block is driven by its own 21kw electric motor.

5. Discharge Belt and Wood containment bin driven by one 21kw motor.

Built for: Wood Shavings for the chicken and equestrian industry. (With standard 4 blade on each shaving block chicken.--Simply take 2x blades off for larger equestrial size)

Thickness of Shave: Easily eadjustable for thickness of shave by ajusting with a spanner the shaving block carrier frame (Both blocks mounted on this frame)

Principle of operation: Logs are dragged across 2x Shaving Blocks working in opposite directions.

Main chassis: 1035mm wide x 3600mm long x 1570mm high and powder coated.

Steel used and weight: Chassis : 7,6mm x 38,0mm x 5mm channel steel. Weight 750kg

Log containing bin: Hopper size 470mm x 1220mm x 550mm made from 6mm pressed steeland running on 4x double bearing steel pullies on tracks.

Shaving Blocks: Two x High speed and precision balanced 450mm wide x 110mm diameter on 80mm carrier shaft with 4x shaving blades on each. 4 bladed for finer chicken shavings 2 blades for equestrian shavings.

Shaving Discharge: 1,200mm conveyer with side and back skirting for a real clean operation.

Drive: Block Each shaving block is fitted with its own 11kw electric motor (Total 2)

Drive: Bin and Belt 1x 11kw Electric motor which is geared for correct speed to drive both.

General: Please note unit delivered without transport wheels!!!

Production:6 to 8 cu meter shavings per hour (Bin must be fully loaded.)

Electric Wiring:All is wired at Ritlee factory also with 2x emergency stops fitted. All that is needed at your side is 16mm 4 core shielded 3 phase wiring to where unit will operate and coupled into control box. Which contains the starters as well.

Logs to be loaded: Wattle, Pine, Eucalyptus etc cut to from 900mm to 1,200mm lengths with a diameter of no less than 50mm and up to 400mm.

Want to know more? Please send us a e-mail also please mention area where you are from. Thanks! (Click Here!)